The light steel stud roll forming machine can make different sizes for C and U profile.
Thickness is normally 0.4-1.2mm. Raw material could be: cold-rolled steel, Galvanized steel, PPGI, high-tensil steel.
If you need to more efficiency and high speed, then we recommend you adpot the servo flying shear with no stop system, the Max. whole line speed can be reached at 50-120m/min.
If you want to produce more than one profile in one machine, we recomend you the double rows forming machine to save space and costs, we called 2 in one machine.
Also we can design the machine as your requirement or drawings.

1. Technical Parameter

Stud Track Roll Forming Machine
No.	Item	Specification
1	Suitable material	Type:Galvanized Coil, PPGI, Carbon steel Coil
		Thickness(mm):0.5-1.5
		Yield strength: 250 - 550MPa
		Tensil stress( Mpa):G350Mpa-G550Mpa
2	Nominal forming speed(m/min)
3	Forming station	14
4	Decoiler	Manual decoiler
5	Main machine motor	Famous China brand
6	PLC brand	Delta
7	Inverter brand	Yaskawa
8	Driving system	Chain drive
9	Rollers’ materail	Steel #45
10	Station structure	Wall panel station
11	Punching system	No
12	Cutting system	Servo following cutting
13	Power supply requirement	380V 50HZ or customized
14	Machine color	Industrial blue or customized

2. Machine Components

3T manual decoiler or automatic decoiler	1 set
Hydraulic non stop cutting	1 set
Roll forming machine	1 set
Hydraulic station	1 set
Control box system	1 unit
Out tables	1 unit
Safety cover	1 unit
Tool box	1 package

3. Application

Our machine has an extensive use in Drywall system, Ceiling system and Floor system.
1. Underground, air port, bus station
2. Building lobby,metro station

3. Supermarket, marketplace
4. Hotel, restaurant,railway station
5. commercial building

4. Profiles we can make

5.Machine picture

Product Tags:

stud and track roll forming machine

rollformingmachine info drywall stud

rollforming machine stud track

Inquiry Cart 0