Sussman Machinery(Wuxi) Co.,Ltd
Sussman Machinery (Wuxi) Co., Ltd.
Add to Cart
Galvanized steel 0.36 Mm-0.6 Mm Thickness 914mm Width AG And R Panel Double Layer Roof/Wall Panel Roll Forming Machine
1. Technical Parameter
| Number | Items | UnitType | RF-DL |
| 1 | Steel Thickness | mm | 0.3-0.8mm Colored Steel/ Galvanized Steel Coil |
| 2 | Forming Speed | m/min | About 8-15 |
| 3 | Roller stands | stand | Upper layer is about 20 stations Lower layer is about 18 stations |
| 4 | Roller Material | mm | 45# steel, coated with chrome |
| 5 | Shaft material and diameter | mm | Ф76 45# steel, coated with chrome |
| 6 | Main Motor Power | Kw | 7.5 |
| 7 | Hydraulic cutting Power | Kw | 4 |
| 8 | Hydraulic pressure | Mpa | 12 |
| 9 | Power Supply | 380V, 60 Hz, 3Phase | |
| 10 | Tolerance | mm | +-1.5 |
| 11 | Material of cutting | Cr12Mov HRC58-62 | |
| 12 | Control system | PLC with touch screen | |
| 13 | Main machine weight | T | 10T |
2. Machine List
| 5 tons passive de-coiler | 1 set |
| Guiding Platform | 1 set |
| Double pre-cutting device | 1 set |
| Main roll forming machine | 1 set |
| Hydraulic cutting machine | 1 set |
| PLC Control box | 1 unit |
| Hydraulic station | 1 unit |
| Passive Out table | 2 units |
| Safety cover | 1 unit |
3. Profile Drawing
This double roof/wall panel machine that can form AG and R panels.
Minimum Coil width for AG panel is 1,038.22mm and R panel minimum is 1,079.5mm finished measurement for both panels is 914.5.
Thickness range 0.360mm-0.666mm.
4. Main Features
1.This double roll forming machine can produce two different profiles with one machine, sharing same machine base frame, un-coiler, PLC control system, which can much save of your cost.
2.More reasonable forming process design; More roller steps with competitive price.
3.The whole line consists of un-coiler, double pre-cutting system, feeding system, roll forming machine with protect guarding cover, post-cut device, PLC control system, and so on.
5. Machine Photo