Sussman Machinery(Wuxi) Co.,Ltd
Sussman Machinery (Wuxi) Co., Ltd.
Add to Cart
0.7-1.2mm Metal Shutter Door Roll Forming Machine With 5.5KW Motor Power
Rolling shutter door is produced by rolling shutter making machine and are used for parking door and home doors ans shops front show and garages, etc. They are very strong and sage to the property. Therefore, the door-rolling shutter provides adequate protection and safety against thefts and fire. These doors are stronger if use enough steel thickness.
In fact, we can supply different kinds of roll forming machines for different shutter doors. If you have your door design, show us your design drawing. A good suggestion can be given out by our enginneer. If you have any idea about your new project, some professional ideas can be gotten from us.
| Material of coil | Material Thickness | 1.5-2mm galvanized |
|
| Un Coiler | 3 tons manual |
| Forming system | Rolling Speed | About 8-12 m/min |
|
| Roller Stations | About 16-18 stations |
|
| Roller Material | Gcr15# Steel with quenching 60mm shaft |
|
| Maim Motor Power | 7.5 kw |
|
| Hydraulic cutting Power | 4 kw |
| Cutting | Material Of Cutting | CR12Mov with quench treatment |
|
| Hardness | HRC58-62 |
|
| Tolerance | +-1.5mm |
| Electrical control system | Electric Source | 380V, 50HZ,3 phase |
|
| Control System | PLC with touch screen |
|
| Weight | About 4 tons |
|
| Way Of Drive | 1 inch single chain |
|
| Size of machine | About Length 8500mm* Width 600mm* Height 1000mm |
Working flow:
Decoiler—→Level device—→Main roll forming machine—→Hydraulic punching—hydraulic cutting& Punching→ Run out table
Profile drawing
Machine Picture Shows