Stud and Track Roll Forming Machine, as known as Hat Shape Roll Forming Machine, Main Channel Roll Forming Machine, Omega Furring Channel Roll Forming Machine, Wall angle Roll Forming Machine, Ceiling Roll Forming Machine Light Steel Keel Roll Forming
 Machine etc. These can produce studs, tracks and many other shapes derived form Shape C.
 Thickness is normally 0.25-1.2mm .
 If you need to more efficiency then we recommend you adpot the Flying shear with No-stop system. Max line speed can be reach at 40m/min.
 If you want to produce more than one profile in one machine, we recommend you the double rows forming machine and triple rows forming machine to save space and economy.
 
Technical Specification
  	 			 
 			Items
 			Specifications
 		
 			Material of coil
 			Material Thickness
 			0.3-1.2mm galvanized steel
 		
 			Forming system
 			Rolling Speed
 			8-15 m/min
 		
 			Roller Stations
 			About 13 stations forming
 		
 			Roller Material
 			Cr40 Steel with quenching
 		
 			Shaft Material
 			45# Steel Diameter 75mm shaft
 		
 			Main Motor Power
 			7.5 KW
 		
 			Hydraulic cutting Power
 			4 KW
 		
 			Way Of Drive
 			1 inch single chain
 		
 			Cutting System
 			Material Of Cutting
 			CR12 with quench treatment
 		
 			Hardness
 			HRC58-62
 		
 			Tolerance
 			+-1.5mm
 		
 			Cutting blade
 			1 set of cutting blade
 		
 			Electrical control system
 			Electric Source
 			380V , 50HZ, 3 phases
 		
 			Control System
 			PLC Delta
 		
 			 
 			Weight
 			About 4 tons
 		
 			 
 			Size of machine
 			7500* 600* 800m
 		
  
Working Flow
Decoiler—feeding with guide—Roll forming—punching&Cutting—Products collecting
 
 
 
 

Stainless Steel U Shape 10m/Min Cold Roll Forming Machine

Cable Tray Roll Forming Machine

Stud And Track Roll Forming Machine

CZ Purlin Roll Forming Machine

Shutter Door Roll Forming Machine

Rack Roll Forming Machine

Floor Deck Roll Forming Machine

Door Frame Roll Forming Machine

Roof Panel Roll Forming Machine

Guardrail Roll Forming Machine

PU Sandwich Panel Production Line

PU Sandwich Wall Panel

Steel Slitting Lines

Double Layer Roll Forming Machine

Ridge Cap Roll Forming Machine

Downspout Roll Forming Machine

Roll Forming Equipment

Steel Silo Roll Forming Machine

Strut Channel Roll Forming Machine

Stainless Steel U Shape 10m/Min Cold Roll Forming Machine

steel silo roll forming machine

steel roll forming machine

sheet metal shaping machine

	Items	Specifications
Material of coil	Material Thickness	0.3-1.2mm galvanized steel
Forming system	Rolling Speed	8-15 m/min
	Roller Stations	About 13 stations forming
	Roller Material	Cr40 Steel with quenching
	Shaft Material	45# Steel Diameter 75mm shaft
	Main Motor Power	7.5 KW
	Hydraulic cutting Power	4 KW
	Way Of Drive	1 inch single chain
Cutting System	Material Of Cutting	CR12 with quench treatment
	Hardness	HRC58-62
	Tolerance	+-1.5mm
	Cutting blade	1 set of cutting blade
Electrical control system	Electric Source	380V , 50HZ, 3 phases
Electrical control system	Control System	PLC Delta
	Weight	About 4 tons
	Size of machine	7500* 600* 800m