Item NO	Description	Offered specification
1.0	Roll forming machine
1.1	Rolling speed	12-15m/min(not include cutting time)
1.2	Rolling thickness	0.15mm-0.3mm PPGI
1.3	Raw material	Color painted coils
1.4	Main Motor	7.5KW
1.6	Dimension	About 8000×1600×1200(mm)
1.7	Effective width	825mm
1.8	Feeding Coil width	1000mm
1.9	Roller stations	About 20 stations
1.10	Roller material	45#forge steel, coated with chrome
1.11	Shaft diameter	Φ76mm
1.12	Transmission	By chain 1.2 inch
1.13	Material of chain	45# forged steel with frequency quenching, 12A
1.14	Material of cutting	Cr12Mov with quench HRC58-62°
1.15	Tolerance	10m+-1.5mm
1.16	Hydraulic station	4kw

Technical Process

Uncoiling—Feeding with guide—Roll forming—cutting—Products collecting

Machine List:

No	Name	Type	quantity
1	5 ton passive de-coiler	RF-RP18-63.5-825	1 set
2	Main roll forming machine	RF-RP18-63.5-825	1 set
3	Control box	RF-RP18-63.5-825	1 unit
4	Hydraulic station	RF-RP18-63.5-825	1 unit
5	Passive Out tables	RF-RP18-63.5-825	2 units
6	Mesh cover	RF-RP18-63.5-825	1 unit

Details of each part:

1. Cutting

(1) Cutting after forming: Cut the sheet after roll forming to required length

(2) Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.

(3) Material of blade: CR12with heat treatment

(4) Length measuring: Automatic length measuring

(5) Tolerance of length: 10m+/- 2mm

2. Out table:

Size:2000*1350*1000mm, two sizes

3. Control Box: Panasonic

(1) Power supplier: 380V, 50 Hz, 3Phase (adjusted with the requestment)

(2) length & quantity measurement automatically;

(3) length & quantity controlled by PLC,

(4) Length inaccuracy can be amended easily.

(5). Control panel: Button-type switch and touch screen

(6) Unit of length: millimeter (switched on the control panel)

Product Tags:

roof panel roll forming machine

siding panel roll forming machine

ppgi roofing sheet machine

Inquiry Cart 0