Sussman Machinery(Wuxi) Co.,Ltd
Sussman Machinery (Wuxi) Co., Ltd.
Add to Cart
Thick Galvanized Steel Roof Panel Roll Forming Equipment with Chain Driving System
Machine List
| Machine list | 5 tons passive de-coiler | 1 set | |
| Main roll forming machine | 1 set | ||
| PLC Control box | 1 unit | ||
| Hydraulic station | 1 unit | ||
| Out tables | 2 units |
Technological process
Uncoiling—Feedingwithguide——Rollforming—Cutting—Products collecting
Un-coiler:
5 tons passive decoiler
Coil inner Diameter: ￠508-610mm
Max out diameter of the coil: ￠1500mm
Max Coil Width: 1250mm
Roll forming machine:
Roll Forming Machine: RF-RP
Rolling Speed : 10-12m/min(cutting time is not include)
Steel sheet Thickness: 0.3-0.8mm color painted sheets
Machine should be compatible for Aluminium , PPGI , PPGL , etc.
Control System: PLC
Roller Stations: about 14 stations up and 14 stations down
Roller Material : 45# forge steel, coated with chrome
Shaft Material and DIA: ￠75mm,material is 45# forge steel, Chrome with quenching
Main Motor Power: 7.5kw
Hydraulic Pressure: 12Mpa
Tolerance: +1.5mm
Power supplier:380V, 50HZ,3 phase
Way Of Drive:1.2 inch single chain
Color Of The Machine :blue
The size of the forming machine:7000*1500*1000mm
Machine weight: about 8 tons
Cutting:
(1) Cutting motion: The main machine stops and then cut automatically. After cutting, the main machine re-starts automatically.
(2) Material of blade: CR12 with heat treatment
(3) Length measuring: Automatically
(4) The cutting thickness: 0.3- 0.8mm
(5) Hydraulic Station Power: 4 KW
Hydraulic Station
It is controlled by wheel oil pump. After filling the hydraulic oil into
the hydraulic oil tank ,the pump drive the cutter machine to begin the
cutting job.
Components: The system includes a set of hydraulic tank, a set of hydraulic
oil pump, two hydraulic pipes. and two sets of electromagnetism valves.
Out table:
Size:4000*1350*1000mm
Control Box:
Electrical control system part,
t-size:9.0000pt;mso-font-kerning:1.0000pt;" >00mm
(1) Power supplier: 380V, 50 Hz, 3Phase (adjusted with the requestment)
(2) length & quantity measurement automatically;
(3) length & quantity controlled by PLC,
(4) Length inaccuracy can be amended easily.
(6). Control panel: Button-type switch and touch screen
(7) Unit of length: millimeter (switched on the control panel)
Machine pictures