Matertial Width 1000mm 10 Ton Hydraulic Decoiler Steel Sheet PU Foam Sandwich Panel Line 8m/min Speed

Technical Parameter

1.1 Uncoiler

a) motor power: 3Kw
b) hydraulic power: 2.2Kw
c) raw material: color steel sheet, aluminum sheet
d) innder diameter of coil: 500mm- 600mm
d) outer diameter of coil: 1200mm
e) coil weight: 10T
f) sheet thickness: 0.4-0.8mm
g) sheet width: 1250mm
f) uncoil speed: 1.5-12m/min
g) hydraulic pressure: 6.3Mpa

1.2 Coil Car

a) hydraulic cylinder lift stroke: up panel 0.5m, down panel 0.5m
b) coil car stroke: 2.5m
c) pressure of hydraulic system: 6.3Mpa

1.3 Two sets of steel sheet transverse cutting machines

a) hydraulic
b) cut steel sheet according to certain length
c) two sets of PVC film covering device wich applies the PVC film onto the steel sheet

1.4 Roll Forming Machine

a) Motow power: up panel 4Kw, down panel 7.5Kw
b) roll forming speed: 1.5-12m/min
c) roller material: 40Cr, surface chrome coated, thickness 0.05mm
d) The way of width adjust: straight track, silk pole, reducer motor adjustable
e) width adjustable range: 600-1250mm
f) sheet thickness: 0.4-0.8mm
g) structrue: arm type adjustable, support roller in the middle
h) shaft diameter: 50mm

1.5 Pre-heating Room

a) temperature sensor: hot couple
b) temperature adjustment: automatic control by temperature control equipment
c) hot air motor: 18.5Kw
d) hot air heater: 200Kw
e) heat type: heated by electricity and air circulate

1.6 Double belt machine

a) effective working length: 24m
b) length & width of double belt: 1400mm x 267mm
c) double belt material: alloy steel
d) double belt thickness: 14mm
e) speed: 3-10m

1.7 Band Saw Cutting Machine

a) outline dimension of band saw cutting machine: 5500mmx5000mmx 3000mm
b) run speed of band saw: 1000-1500rpm
c) rotate diameter of band saw: 550mm
d) cutting speed of band saw: 50m/min-1000m/min
e) width of band saw: 30mm
f) length of band saw: 3000mm-4000mm
g) transverse move distance: 1500mm
h) cut length on line: 3000mm

PU Sandwich Panel Main Components

No.	Machine Name
1.	Un-coiler 10 TONS	2 Sets
2.	Steel sheet transverse cutting machine, steel sheet surface PVC film covering device	2 Sets
3.	Roll forming machine for wall and roof panel	4 sets
4.	Panel pre-heat equipment	1 set
5.	PU/PIR 2 component Liquid mixing and injecting section for foaming with high pressure (with Singapore brand)	1 set
6.	24m double belt machine include Hydraulic pressure control system with 4 sets side nylon seal blocks to make different thickness of wall panel and roof panel	1 set
7.	Heating and heat insulation system	1 set
8.	Automatic Panel Bandsaw Cutting Machine	1 set
9.	Automatic Vacuum stacking machine and wrapping machine	2 sets
10.	Cooling conveyer	1 set
11.	Cowper stove 0.5 ton	1 set
12.	Air compressor and tank 2 m3	1 set
13.	PU Foaming machines (Singapore Brand)	1 set

Advantage for PU Sandwich Panel

1. Reasonable Price
2. High Quality
3. 12 Months Warranty
4. More Than 10 Years Experience
5. Durable
6. Reliable

Working Flow of PU Sandwich Panel

Profiles of PU Sandwich Panel

Loading Pic